PRODUCT DETAILS
The QTAC™ 125HP is identical to the high pressure 85HP, but carries an additional 40 gallons of water. Weighing approximately 1,400 pounds full of water, the 125 is outside the payload capacity of most UTVs, but it works perfectly in pick-up trucks. The 125HP features a 125-gallon, baffled and welded-copolymer tank, max-105 GPM pump with a 5.5-horsepower Honda GX200 engine and 50-feet of 3/4″ hose.
Like all the QTACs, the 125HP’s main design purpose is to either prevent fires, or snuff them out upon first ignition. With the Scotty around-the-pump foam system and either 5.0 or 2.5-gallons of Foam A on board, the applicator can lay down a wet blanket of short-term fire suppressant up to 80 feet in length, for well over 14 minutes of constant use. And like all QTACs, the 125HP can draft out of an external water source and pump through the discharges at the same time.
OPTIONAL EQUIPMENT
Draft Hose Kit
Shown with Optional Forklift Runners
Hose Reel Line up to 100 feet of 3/4″
Nozzle Upgrade
Scotty Around-the-Pump Foam Eductor
End-of-the-Line Foam
Tank Capacity Restrictor
1-1/2″ NST Discharge
2″ NST Threaded Suction
THE 125HP ADVANTAGE:
- Light weight, won’t dent or crack
- Increased water capacity allows for longer pump times
- High pressure, Waterax Versax 6 pump
- Water reach of over 80 feet in calm conditions
THE QTAC 125HP
SPECIFICATIONS
ENGINE
Model: Honda GX200 Series, 4-stroke horizontal shaft, OHV, air cooled gasoline
Maximum Power: 5.5 hp (4.1 KW) @ 3,600 RPM
Maximum Torque: 9.1 lb-ft (12.4 Nm) @ 2,500 RPM
Starting System: Manual, Recoil
PUMP
Type: Waterax Versax 6 Self-Priming 2-Stage Centrifugal
Intake: 2″ Male NPT
Discharge: 1-1/2″, 1″, 1″ Male NPT, 2″ Male BSP
83 GPM (314 lpm) @ 50 PSI (3.4 BAR)
63 GPM (238 lpm) @ 75 PSI (5.2 BAR)
38 GPM (144 lpm) @ 100 PSI (6.9 BAR)
TANK
Type: MTECH PolyTough™ welded copolymer, internally baffled
Capacity: 125 U.S. Gallons
Fill Well: 4″ fill tower, vented
Drain: 1-1/2″ plunger style
Features: Grab rails, water level sight tube, mounting flanges
STANDARD EQUIPMENT INCLUDES
Hose Reel: Hannay electric, 1″ gated pump to reel
Auxiliary Discharge: 1″ NPSH Gated
Pressure Gauge: Liquid-filled Pressure Gauge
Hose: 50-feet of 3/4″
Nozzle: Brass bullseye with 1/4-turn shut-off
WEIGHTS
Dry Weight: 297 lbs.
Wet Weight: 1,340 lbs.
Note: Electric hose reel adds 30 pounds; ATP foam adds approximately 10 pounds (dry)
OPTIONS:
- 2.5 GALLON AROUND-THE-PUMP FOAM KIT – $1150.00
- 5.0 GALLON AROUND-THE-PUMP FOAM KIT – $1250.00
