S3 HIGH CLEARANCE REAR LOWER RADIUS RODS – POLARIS RZR XP 1000

Introducing the S3 High Clearance Lower Radius Rods designed to provide more ground clearance to the RZR 1000 XP. More ground clearance means less drag when mud riding, less rock contact when crawling, and a sleeker sportier look when trail riding. Based on our research, this kit offers the HIGHEST clearance on the market. These rods replace OEM rods and include everything for a direct bolt-on price. Built with 1 1/4″ DOM tubing and precision made 5/8″ heim joints and misalignment spacers, these “Improved Angle” radius rods will stand the test of time no matter how EXTREME !!! ***********These radius rods do not work with OEM Polaris rear bumper********************

S3 High Clearance Radius Arms 1000 XP

DOES NOT WORK WITH FACTORY POLARIS REAR BUMPER

1. Elevate rear of RZR and support with jack stands
2. Remove tires and lower radius arms, all hardware will be reused.
3. Loosen jam nuts on new radius arms and rotate heim joints out until arms are the same length as the factory arms with equal threads showing on both ends.
4. Install new radius arm with the straightest ends inward and the “S3” emblem to the rear; be sure that all the bushings stay in place.
5. Reinstall tires and check alignment, additional adjustments of heim joints might be necessary.

***RZR 1000 XP Only***

The bottom rear portion of trailing arm (3/8” of an inch) must be cut off to allow for Lower Radius Rod Installation