About PRP Seats :
PRP’s 5-point Customizable Harness with 3” lap, 2″ shoulder belts gives you the security you want, with added comfort for those long rides off-road.
MAKE IT YOURS! CHOOSE THE OPTIONS FOR YOUR BUILD.
Tabs
- Bolt in Tabs – The traditional tabs found on most harnesses. Can be bolted to the appropriate mounting location in your vehicle.
- Clip-in Tabs – Make it quicker and easier to remove the harness for cleaning, or to access a battery. All the tabs on these harnesses can be removed and switched out with Clip in Tabs, you just need to purchase them separately here.
Adjusters
- Roller Adjuster – The traditional lap belt adjuster found on most harnesses. Can sometimes be difficult to use if it gets dirty.
- EZ-Adjuster – PRP’s new and improved style of the adjuster. The EZs allow you to easily tighten and loosen the belts, even if they are dirty or muddy. These come standard on all the shoulder belts, but now you can add them onto the lap belts as well!
- Pull-up EZ Adjuster – Rather than the traditional pull-down lap belts, with these belts you pull the straps up towards your chest. It’s easier to get the belts extra tight if there’s not a lot of room in the cab. The 3 bar adjusters on each end also allow you to change the spacing of the EZ Adjusters to account for larger or small riders.
- Ratchet Adjuster – Allows you to get your lap belts as tight as possible. Great for those who are racing at high speeds. Mount the ratchet mechanism side of the lap belt next to the door, and your crew can tighten it down with the supplied ratchet.
Shoulder Pads
- Removable Shoulder Pads – The Customizable 5-point Harness allows for versatility when you want comfort or when you’re racing. Keeps the pads on for recreational driving to protect your neck from chafing against the belts. Then when your racing – simply remove the pads and the straps can be secured into your HANS neck restraint device. It works perfectly for any setup!
- Sewn-in Pads – Standard sewn-in pads, provide comfort and stops chaffing.
WARNING
Proper installation and consistent use of the 5-point harness restraint system is critical to your safety in event of an accident. To reduce the risk of serious injury or death:
- Follow vehicle manufacturers’ and PRP Seats instructions and safety messages during the installation and use of this product.
- Use all belts provided. Secure the lap belt first; low and snug across the hips. Sternum strap tight at chest line (min. 4” below the neck). Adjust remaining straps per instructions and confirm fitment restrains user & provides safe clearance from wheel, dash, roll cage, etc.
- Inspect all components of the 5-point harness restraint system regularly & replace them as indicated by accident, wear or abrasion. Replace no later than 2 years from the date on the SFI tag, or purchase.
- This competition restraint system is intended for UTV or other off-road vehicle-not replacement for FMVSS 209 restraints. Never use with child car seats or boosters.
